What You Need To Know; Before You Begin; Broadband - ZyXEL Communications LTE Series User Manual

• Use the Cellular IP Passthrough screen to configure an LTE WAN connection
Table 13 WAN Setup Overview
LAYER-2 INTERFACE
CONNECTION
Ethernet

5.1.2 What You Need to Know

The following terms and concepts may help as you read this chapter.
WAN IP Address
The WAN IP address is an IP address for the Zyxel Device, which makes it accessible from an outside
network. It is used by the Zyxel Device to communicate with other devices in other networks. The ISP
dynamically assigns it each time the Zyxel Device tries to access the Internet.
APN
Access Point Name (APN) is a unique string which indicates an LTE network. An APN is required for LTE
stations to enter the LTE network and then the Internet.

5.1.3 Before You Begin

You may need to know your Internet access settings such as LTE APN, WAN IP address and SIM card's
PIN code if the INTERNET light on your Zyxel Device is off. Get this information from your service provider.

5.2 Broadband

Use this screen to change your Zyxel Device's Internet access settings. The summary table shows you the
configured WAN services (connections) on the Zyxel Device. Use information provided by your ISP to
configure WAN settings.
Click Network Setting > Broadband to access this screen.
Chapter 5 Broadband
INTERNET CONNECTION
DSL LINK TYPE MODE
N/A
Routing
LTE Series User's Guide
ENCAPSULATION
IPoE
49
(Section 5.8 on page
CONNECTION SETTINGS
WAN IPv4/IPv6 IP address, NAT, DNS
server and routing feature.
60).