Email Notification Edit - ZyXEL Communications LTE Series User Manual

Table 85 Maintenance > Email Notification (continued)
LABEL
Email Address
Remove

25.2.1 Email Notification Edit

Click the Add button in the Email Notification screen. Use this screen to configure the required
information for sending email via a mail server.
Figure 141 Email Notification > Add
The following table describes the labels in this screen.
Table 86 Email Notification > Add
LABEL
Mail Server
Address
Port
Authentication
User name
Authentication
Password
Account email
Address
Chapter 25 Email Notification
DESCRIPTION
This field displays the email address that you want to be in the from/sender line of the email that
the Zyxel Device sends.
Click this button to delete the selected entry(ies).
DESCRIPTION
Enter the server name or the IP address of the mail server for the email address specified in the
Account email Address field.
If this field is left blank, reports, logs or notifications will not be sent via email.
Enter the same port number here as is on the mail server for mail traffic.
Enter the user name (up to 32 characters). This is usually the user name of a mail account you
specified in the Account email Address field.
Enter the password associated with the user name above.
Enter the email address that you want to be in the from/sender line of the email notification that
the Zyxel Device sends.
If you activate SSL/TLS authentication, the email address must be able to be authenticated by
the mail server as well.
LTE Series User's Guide
189