ZyXEL Communications LTE Series User Manual page 47

Each field is described in the following table.
Table 12 Status Screen
LABEL DESCRIPTION
LAN IP Setup
IP Address Enter the LAN IPv4 IP address you want to assign to your Zyxel Device in dotted decimal
notation, for example, 192.168.1.1 (factory default).
Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0
(factory default). Your Zyxel Device automatically computes the subnet mask based on the
IP Address you enter, so do not change this field unless you are instructed to do so.
IP Addressing Values
Beginning IP This field specifies the first of the contiguous addresses in the IP address pool.
Address
Ending IP This field specifies the last of the contiguous addresses in the IP address pool.
Address
DHCP Server State
DHCP Server This is the period of time DHCP-assigned addresses is used. DHCP automatically assigns IP
Lease Time
addresses to clients when they log in. DHCP centralizes IP address management on central
computers that run the DHCP server program. DHCP leases addresses, for a period of time,
which means that past addresses are "recycled" and made available for future
reassignment to other systems.
Days/Hours/ Enter the lease time of the DHCP server.
Minutes
Save Click Save to save your changes.
Chapter 4 Connection Status
LTE Series User's Guide
47