ZyXEL Communications LTE Series User Manual page 220

Example - Enabling IPv6 on Windows 7
Windows 7 supports IPv6 by default. DHCPv6 is also enabled when you enable IPv6 on a Windows 7
computer.
To enable IPv6 in Windows 7:
Select Control Panel > Network and Sharing Center > Local Area Connection.
1
Select the Internet Protocol Version 6 (TCP/IPv6) checkbox to enable it.
2
Click OK to save the change.
3
Click Close to exit the Local Area Connection Status screen.
4
Select Start > All Programs > Accessories > Command Prompt.
5
Use the ipconfig command to check your dynamic IPv6 address. This example shows a global address
6
(2001:b021:2d::1000) obtained from a DHCP server.
Appendix B IPv6
LTE Series User's Guide
220