Lincoln Electric PIPEFAB Series Operator's Manual page 63

PIPEFAB™ WELDING SYSTEM
TIG START/END SETTINGS
FIGURE B.9
1. Set all to Auto – Start/End se�ngs are set to "auto" by default. These se�ngs are programmed
based on process and setpoint to provide ideal welding.
2. Start Time – Controls the voltage for a specified �me at the beginning of the weld. During that
�me, the machine will ramp from the Start Procedure to the Welding Procedure.
3. Crater Time – Controls the voltage for a specified �me at the end of the weld a�er the trigger
is released. During the Crater �me, the machine will ramp from the Weld Procedure to the
Crater Procedure.
4. Current Se�ngs.
.
B-12
OPERATION