PIPEFAB™ WELDING SYSTEM
7. Assemble the gas hose to the Oxo or FastMate gun adapter.
FIGURE A.19
8. Select the appropriate guide tube and secure with the set screw.
FIGURE A.20
9. Slide the Oxo or FastMate gun adapter into the wire drive and secure with the thumb screw.
10. For FastMate gun adapters, connect the trigger pigtail to the connector on the front of the feeder.
Wire size
guide tube
.023 – .045" (0.6 – 1.2 mm)
.045 – 1/16" (1.2 – 1.6 mm)
1/16 – 5/64" (1.6 – 2.0 mm)
.068 – 7/64" (2.0 – 2.8 mm)
A-14
INSTALLATION
Number of grooves in
1
2
3
4