Lincoln Electric PIPEFAB Series Operator's Manual page 62

PIPEFAB™ WELDING SYSTEM
TIG HOME SCREEN
FIGURE B.8
1. Menu Bar - Use the Menu knob to scroll through the op�ons along the bo�om of the screen.
Press the knob to select the highlighted op�on.
2. Current Se�ng - Sets the desired current, use le� knob to adjust.
3. Start Type Selec�on – Touch Start, HF.
4. Post-Flow Time – Time that the shielding gas con�nues to flow a�er the arc has been
terminated. Only displayed when set to a non-zero value.
5. Pre-Flow Time - Time that the shielding gas con�nues to flow before the arc has been started.
Only displayed when set to a non-zero value.
6. Output Indicator – Output will be on in Touch Start mode without a remote. Output will be off
un�l triggered when a remote is connected. NOTE: HF mode requires a remote to be
connected.
B-11
OPERATION