Sony DMW-S01NL Installation Manual page 28

2-1 Main Unit
6 AUDIO OUT connectors (XLR 3-pin, ×4)
Output four channels of analog audio program signals.
7 AUDIO IN connectors (XLR 3-pin, ×4)
Input four channels of analog audio signals.
8 REMOTE 1 and 2 connectors (D-sub 9-pin, ×2,
RS-422A standard)
Connect to the remote connectors of VTRs to control
the VTRs from the Digital Media Workstation.
9 VP REF (video processing reference) OUT
connector (BNC type)
Outputs equivalent signals to the signals output from
the OUT connector (2 on the previous page). Connect
to the REF connector of the AV Processing Board.
3 CPU section
1 Mouse connector (PS/2)
Connect the supplied mouse.
2 Keyboard connector (PS/2)
Connect the supplied keyboard.
3 Printer port connector (D-sub 25-pin)
Connect a printer or other device with a parallel I/O
connector.
2-6
Chapter 2 Names and Functions of Parts
1 Mouse connector
2 Keyboard connector
3 Printer port connector
7 Line I/O connectors
6 Microphone/Headphones connectors
5 Serial port 1 connector
0 MON (monitor) OUT connector (BNC type)
Provides an SDI monitor output signal.
qa SYSTEM I/F IN/OUT connectors (BNC type,
×2)
Allow you to input SDI signals from the AV
Processing Board, and output SDI signals to the AV
Processing Board. Connect the IN connector to the
OUT A connector of the AV Processing Board, and
connect the OUT connector to the IN A connector of
the AV Processing Board.
qs SDI IN/OUT connectors (BNC type, ×2)
Input SDI signals and output SDI program signals.
4 Serial port 2 connector
9 Network connector
8 USB connectors
4 Serial port 2 connector (D-sub 9-pin)
Connect a modem or other device with a serial port
connector.
5 Serial port 1 connector (D-sub 9-pin)
Connect a modem or other device with a serial port
connector.
6 Microphone/Headphones connectors (minijack)
Connect a microphone to the left connector and
headphones to the right connector.