Table of Contents
Advertisement
qa System using 1080/59.94i or 1080/50i and 1080/23.98PsF
The figure below shows a system using 1080/59.94i
or 1080/50i and 1080/23.98PsF, and using one
HDCAM VTR (HDW-F500) via SDTI interface.
Main Unit (Digital Media Workstation
and AV I/O Block)
REMOTE 1
AC IN
a)
b)
REFERENCE
IN
d)
TG700 BG7 (Sony/Tektronix)
b)
75-Ω termination
switch: ON
b)
VIDEO INPUT
REMOTE 1-IN(9P)
AC IN
a) AC power cord
b) 75-Ω coaxial cable (5C-2V or equivalent)
c) 75-Ω coaxial cable (5C-FB or equivalent)
d) 9-pin remote control cable
e) Cable with RCA phono plugs
f) Cable with stereo miniplugs
g) VP REF cable (supplied)
h) See page B-17 for the settings of the TG700
BG7 Black Generator and the VTR.
g)
b)
b)
f)
Line output
REF IN
SYSTEM I/F OUT
SYSTEM I/F IN
h)
75-Ω termination
switch: ON
VIDEO INPUT
SDTI IN
Audio monitor
e)
MON OUT L/R
AUX 2
SDTI OUT
IN A
SDTI IN
OUT A
b)
SDTI OUT
HD SDI INPUT
HD SDI INPUT(INPUT MONITOR)
HD SDI OUTPUT
HD SDI OUTPUT
HDW-F500 (recorder/player)
Notes
• Be sure to connect the HD SDI IN connector of the Main Unit
with the HD SDI OUTPUT connector of the VTR.
• When nothing is connected to the RERERENCE THRU
connector on the AV I/O block, put a terminator on the
connector.
CH-1
HD monitor
CH-2
HD SDI IN
HD SDI OUT
REF IN
b)
c)
b)
c)
c)
c)
Appendix B
B-13
Advertisement
Table of Contents
Troubleshooting
