Setting The Aa Battery Type; Shure Rechargeable Battery - Shure AD3 User Manual

Note: If using AA batteries, set the battery type to ensure the transmitter's battery status indicator is accurate.
3. Press and hold X to turn on the transmitter.
4. Select the appropriate input pad or boost to avoid overloading the audio input our add boost to low-output sources: Au­
dio > Pad
◦ ­12 dB: Use with high output sources, such as line levels and point-to-point applications.
◦ Off (default): Use with typical microphones.
◦ +12 dB: Use with low output sources.
5. Plug the transmitter into an XLR microphone or the output of an audio device.
Note: If you remove or replace the batteries without turning the transmitter off, the device will turn on again when the batteries are replaced.

Setting the AA Battery Type

To ensure accurate display of transmitter runtime, set the battery type to match the battery you have installed.
Note: If a Shure rechargeable battery is installed, selecting a battery type is not necessary and the battery type will display Shure.
1. Navigate to Utilities and select Battery.
2. Use the ▼▲ buttons to select the installed battery type:
◦ Alkaline = Alkaline
◦ NiMH = Nickel Metal Hydride
◦ Lithium = Lithium Primary
3. Press O to save.

Shure Rechargeable Battery

Shure SB900­series lithium­ion batteries offer a rechargeable option for powering the transmitters. Batteries charge to 50% ca­
pacity in 1 hour and reach full charge within 3 hours.
Single chargers and multiple bay chargers are available to recharge the Shure batteries.
Caution: Only charge Shure rechargeable batteries with a Shure battery charger.
Shure SB900B Runtime
2 mW
8+ hours
Note: Phantom power, RF output and the impedance of the connecting device can impact battery life.
Checking Battery Info
When using a Shure rechargeable battery, the receiver and transmitter home screens display the number of hours and minutes
remaining.
Detailed information for the battery is displayed Battery menu of the transmitter: Utilities > Battery
• Battery: The chemistry type of for the installed battery (Shure, Alkaline, Lithium, NiMH)
10 mW
8+ hours
35 mW
5+ hours
Shure Incorporated
7/23