Battery Installation
① Accessing the Battery
Compartment
② Installing Batteries
Setting the AA Battery Type
To ensure accurate display of transmitter runtime, set the battery type in the transmitter menu to match the installed AA battery
type.
Note: If a Shure SB900A rechargeable battery is installed, selecting a battery type is not necessary and the battery type will display Shure.
1.
Navigate to the Utilities and select Battery.
2.
Use the ▼▲ buttons to select the installed battery type:
◦
Alkaline = Alkaline
◦
NiMH = Nickel Metal Hydride
◦
Lithium = Lithium Primary
3.
Press enter to save.
AA Battery Installation
Fully insert the batteries as shown to ensure proper battery contact and to allow the door to latch securely.
Press the side tabs on the bodypack and open the battery door as shown to access the bat
tery compartment.
•
AA Batteries: Place batteries (note polarity markings) and AA Adaptor as shown and
close the door
•
Shure SB900A Battery: Place battery as shown (note polarity markings). Remove the
AA adapter and set it aside. Close the door to secure the battery.
Note: If using AA batteries, set the battery type using the transmitter menu.
Shure Incorporated
8/24