Table of Contents
Advertisement
Gain
Sets the input sensitivity level (gain). Gain range is -10 to +40 dB in 1 dB steps.
RF Mute
Disables the RF carrier signal, which mutes transmission of audio.
TX On:
RF signal enabled
TX Off:
RF signal disabled
When the transmitter is set to TX Off:, the brightness of the power indicator LED will pulse.
Unlink
Ends the Link relationship between transmitter and receiver.
YES:
Ends the Link between transmitter and receiver.
NO:
Preserves the Link between transmitter and receiver.
Note: When a transmitter is unlinked, the channel name reverts to Unlinked.
ShowLink Test
Activates the ShowLink test 5-bar display. Measures the remote control range of a ShowLink Access Point.
•
5 bars indicate the center of the coverage area
•
1 bar indicates the outer boundary of the coverage area
•
If bars are not displayed, ShowLink control is not available
Firmware
Displays the installed firmware version.
Device ID
Identifies the transmitter on a linked receiver or in WWB software.
•
ID length can be up to 8 characters
•
Use arrow buttons to scroll through characters
•
Use set button to save and move to the next character
AA Type
This setting ensures accurate battery metering when using the optional AA battery carrier. Set the battery type to Alkaline,
NiMH, or Lithium.
Note: Menu not displayed unless an AA battery carrier is installed.
Shure Incorporated
10/18
Advertisement
Table of Contents
