Battery Installation
① Accessing the Battery
Compartment
② Installing Batteries
Setting the AA Battery Type
To ensure accurate display of transmitter runtime, set the battery type in the transmitter menu to match the in
stalled AA battery type.
Note: If a Shure SB900A rechargeable battery is installed, selecting a battery type is not necessary and the battery
type will display Shure.
1. Navigate to the Utilities and select Battery.
2. Use the ▼▲ buttons to select the installed battery type:
◦ Alkaline = Alkaline
◦ NiMH = Nickel Metal Hydride
◦ Lithium = Lithium Primary
3. Press enter to save.
Press the side tabs on the bodypack and open the battery door as shown to ac
cess the battery compartment.
• AA Batteries: Place batteries (note polarity markings) and AA Adaptor as
shown and close the door
• Shure SB900A Battery: Place battery as shown (note polarity markings). Re
move the AA adapter and set it aside. Close the door to secure the battery.
Note: If using AA batteries, set the battery type using the transmitter menu.
Box: When the box has an "x", Mute Mode is on and
engaged. If the box is empty, Mute Mode is on, but not
engaged.
Shure Incorporated
6/24