Menu Item Descriptions; Radio Menu; Audio Menu - Shure AD3 User Manual

Menu Item Descriptions

Radio Menu

Freq
Press the O button to enable editing of a group (G:) channel (C:) or frequency (MHz). Use the arrow buttons to adjust the
values. To edit the frequency, press the O button once to edit the first 3 digits, or twice to edit the second 3 digits.
Power
Higher RF power settings can extend the range of the transmitter.
Note: Higher RF power settings decrease battery runtime.
Output
Sets the RF output to On or Mute.
◦ On: RF signal is active
◦ Mute: RF signal is inactive

Audio Menu

Phantom
Adds phantom power for condenser microphones. Select +12V or +48V as required by the microphone.
Input Pad/Boost
Adjust the pad to avoid overloading the audio input or add a boost to low­output sources. Choose between ­12 dB, Off (de­
fault), and +12dB.
◦ ­12 dB: Use with high output sources, such as line levels and point-to-point applications.
◦ Off (default): Use with typical microphones.
◦ +12 dB: Use with low output sources.
HP Filter
High-pass filter. Scroll up to turn on the filter and set the low-frequency rolloff in Hz; scroll all the way down to turn off.
Range: 40 Hz to 240 Hz.
Polarity
Shure Incorporated
15/23