Message Waiting Light And Messaging - Comdial 8012S User Manual

5.2 Message Waiting Light and
Messaging
If the system installer designates your IP speakerphone to have
message-wait originate ability, you can turn on the message-waiting
light of any other telephone.
• To turn on the message-waiting light (and a broken dial tone,
if installer programmed) at another station that is idle or
busy,
1. Press INTERCOM.
2. Dial *3.
3. Dial the extension number or press DSS/BLF button of sta-
tion to be alerted. The message-waiting light of called sta-
tion will flash.
• You can also turn on the message-waiting light and broken
dial tone at another station when that station is busy,
1. Hear the busy tone and remain on the line.
2. Select MESSAGE.
3. Hang up.
October, 02
iPrimo Speakerphone Station User's Guide
Wednesday 19 11:36am
Calling J Smith
Figure 5-2 Select MSG to leave a message
Comdial
CALLBK MSG
63