Wireless Paging System - Comdial 8012S User Manual

• To cancel the automatic redial feature, choose one of the
following:
1. Perform any user activity at the station (go on-hook, select
the speaker button, etc.),
2. Dial #72 to delete all numbers from the redial queue,
3. Select Auto Redial or the programmed AUTOMATIC
REDIAL button while the number you wish to remove from
the redial queue is ringing.

7.5 Wireless Paging System

When available, a wireless paging system option allows you to send
call back and parked call messages to pager units assigned to station
extension numbers of the system to which your IP speakerphone is in
contact. Along with the parked call message, the system parks the
call in orbit for retrieval by the paged party. The type of message that
the system delivers (either alphanumeric or numeric-only) is
dependent upon the pager model in use at the station.
When outside callers call into a system that have both a paging option
and a voice mail option installed, the system gives these callers the
option of either leaving a message or tracking the person that they are
calling.
• To page a called party after receiving a ring—no answer,
1. Make an intercom call to someone and receive no answer.
2. Select TRACK.
3. Hear the confirmation beep (page accepted) or hear a busy
tone (page not accepted).
October, 02
iPrimo Speakerphone Station User's Guide
Comdial 91