Comdial 8012S User Manual page 81

7. Make your speed dial route selection choice from the list on
the LCD by pressing the appropriate button.
• Press a line button to select outside line,
• Dial 00 to select prime line or last line used.
• Dial 01 to 16 to select line group.
• Press the INTERCOM button or dial 8 to select intercom.
Note: You may need a pause between numbers to compensate
for differences in response time between your system and the
host system (ask your attendant about this). To store a pause,
press HOLD, then continue dialing. If your system is behind a
host system that needs a hookflash to access a feature, PRESS
TAP to store a hookflash, then continue dialing.
October, 02
iPrimo Speakerphone Station User's Guide
Select Line
Select Line Group
Select Prime/Last Line
Select Intercom
ARS
EXIT
Figure 6-4 Selecting Line or Intercom
Comdial
PREV
71