Checking The Tire Pressure; Checking The Torque Of The Wheel Lug Nuts - Toro Groundsmaster 4500-D Operator's Manual

Adding Fuel
Figure 16
Fill the tank to about 6 to 13 mm (1/4 to 1/2 inch)
below the top of the tank, not the filler neck, with
Number 2-D diesel fuel.
Note:
If possible, fill the fuel tank after each use; this
will minimize possible buildup of condensation inside
the fuel tank.

Checking the Tire Pressure

Service Interval: Before each use or daily
The correct air pressure in the tires is 138 kPa (20 psi).
Important:
Maintain the recommended pressure
in all tires to ensure a good quality of cut and
proper machine performance. Do not under-inflate
the tires.
Check the air pressure in all the tires before
g198621
operating the machine.
Checking the Torque of the
Wheel Lug Nuts
Service Interval: After the first hour
After the first 10 hours
Every 200 hours
g321569
Torque the wheel lug nuts to 115 to 136 N∙m (85 to 100
ft-lb) in the order shown in
23
Figure 17
Figure 18 and Figure
Figure 18
Front Wheels
g001055
19.
g033358