Machine Specifications; Cutting Unit Specifications; Attachments/Accessories - Toro Groundsmaster 4500-D Operator's Manual

Machine Specifications

Specifications Table
Description
Width of cut
Overall width
Cutting units down
Cutting units up
(transport)
Track width
Front
Rear
Height with ROPS
Raised
Lowered
Overall length
Cutting units down
Cutting units up
(transport)
Ground clearance
Wheel base
Net weight
(with cutting units and no
fuel)
Note:
Specifications and design are subject to change without notice.

Cutting Unit Specifications

Specifications Table
Length
Width
Height
Weight

Attachments/Accessories

A selection of Toro approved attachments and accessories is available for use with the machine to enhance
and expand its capabilities. Contact your Authorized Service Dealer or authorized Toro distributor or go to
www.Toro.com for a list of all approved attachments and accessories.
Use only genuine Toro replacement parts and accessories. Replacement parts and accessories made by other
manufacturers could be dangerous, and such use could void the product warranty.
4500-D Figure 15
280 cm (110 inches) D
286 cm (113 inches) E
224 cm (88 inches) A
B
224 cm (88 inches)
141 cm (56 inches) M
226 cm (88.8 inches) C
165 cm (65.2 inches)
370 cm (146 inches) H
370 cm (146 inches) L
15 cm (6 inches)
171 cm (68 inches) K
1937 kg (4,270 lb)
reference 4700-D
380 cm (150 inches)
391 cm (154 inches)
224 cm (88 inches)
224 cm (88 inches)
141 cm (56 inches)
226 cm (88.8 inches)
165 cm (65.2 inches)
370 cm (146 inches)
370 cm (146 inches)
15 cm (6 inches)
171 cm (68 inches)
2277 kg (5,020 lb)
26.7 cm (10-1/2 inches) at 3/4-inch height of cut
34.9 cm (13-3/4 inches) at 4-inch height of cut
20
Figure 15 reference
F
G
A
B
M
C
H
L
K
86.4 cm (34 inches)
86.4 cm (34 inches)
24.4 cm (9.6 inches) to carrier mount
88 kg (195 lb)