Toro Groundsmaster 4500-D Operator's Manual page 10

Affix over Part No. 112-5297 for CE* for 4500 series machines (Model No. 30885)
Note:
This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum
recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the Operator's Manual as
well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions on
that day and at that site. Changes in the terrain can result in a change in slope operation for the machine.
1. Warning—read the
Operator's Manual; all
operators should be trained
before operating the
machine.
2. Warning—read the
Operator's Manual for
towing information.
3. Tipping hazard—do not
drive on slopes greater than
16°.
4. Keep the cutting units
lowered while driving down
slopes; always wear a
seatbelt when operating the
machine.
127-6447
5. Warning—do not park on
slopes; engage the parking
brake, lower the cutting
units, shut off the engine,
and remove the key before
leaving the machine.
6. Thrown object
hazard—keep bystanders
away.
10
decal127-6447
7. Entanglement hazard,
belt—stay away from
moving parts; keep all
guards and shields in place.