Advanced Rds Settings; Cd Operation - VDO CD 139 User Manual

Briefly press the TA button (14) to select the
TA mode on or off.
When TA mode is on, you will hear the
Traffic Announcement when broadcast.
During traffic announcement, you can
interrupt it by short press of TA button (14),
without switching off the TA mode.
By doing so, the set will return to the
previous operating mode.
Long press on TA button (14) allows
ON/OFF selection of TA LOCAL/TA
DISTANT mode.
TA LOCAL will only allow traffic announcement
from strong station to come through.
TA DISTANT ("RDS TA DX") selection will
allow all received announcements to
interrupt CD play or radio listening.

ADVANCED RDS SETTINGS

Press the SEL button (22) for 2 seconds to
enter the advanced RDS settings menu.
a) TA SEEK or TA ALARM
- TA SEEK mode:
When TP information gets lost at the
current station for retune time which is
set by RETUNE SHORT (30sec.) or
RETUNE LONG (90sec.), the radio start
to retune to next same PI station.
- TA ALARM mode:
When TP information gets lost at the
current station, beeps will be heard.
b) PI SOUND or PI MUTE
In some countries, there is a possibility
of having 2 different stations with same
frequencies but different PI.
If PI SOUND is selected, radio will switch
to the new PI station for few seconds
before switch back to current PI station.
If PI MUTE is selected, radio will mute
when a new PI station is received.
c) RETUNE L or RETUNE S
When PI information is not caught for
retune time, the radio start to retune to
next same PI station.
- RETUNE L mode:
Retune time selected as 90 seconds.
- RETUNE S mode:
Retune time selected as 30 seconds.
d) MASK DPI or MASK ALL
- MASK DPI mode:
Masked only the AF which has different PI.
- MASK ALL mode:
Masked the AF which has different PI
and any other interfering non PI station
which having the same transmitting
frequency.
e) Option for Beep level
- Beep OFF:
No beep will be heard when pressing
of any buttons.
- Beep 2ND:
Beep sound will be heard with any long
press function.
- Beep ALL:
Beep will be heard when pressing any
button.

CD OPERATION

Insert discs, autoplay track and time display.
• SELECT TRACKS
During CD operation, press
TUNE/TRACK buttons (10) or (11) to
advance or reverse to the previous track.
Track number is shown on display.
During CD operation, hold TUNE/TRACK
buttons (10) or (11) to fast forward or fast
reverse. CD play resume when you
release the button.
• PAUSE
Press PAUSE button (21) to pause CD
player. Press it again to resume play.
• REPEAT THE SAME TRACK
During CD operation, press REPEAT
button (19) to continuously repeat the
same track. Press again to stop repeat.
• TRACK SCAN
The scan function enables you to listen to
the first few seconds of each track.
Press SCAN button (20) to activate/
de-activate scan track.
• PLAY ALL TRACKS IN RANDOM ORDER
During CD operation, press SHUFFLE button
(18) to play all tracks on the disc in random
order. Press again to cancel the function.
• EJECT
Press button (9) to stop CD playing and
eject the disc from the disc slot (5).
9