Computer Manual - Master E-17 Owner's Manual

COMPUTER MANUAL

SPECIFICATIONS:
TIME
SPEED (SPD)
(ML/H)
DISTANCE
(ML)
CALORIES
※ODOMETER (ODO)
※PULSE (PUL)
KEY FUNCTIONS:
MODE: Selects the preferred function.
※SET: Sets values of functions "TIME" "DISTANCE"
"CALORIES" "PULSE".
CLEAR (RESET): Resets the value to zero.
※ON/OFF (START/STOP): Starts/ turns off the trainer,
pauses the training.
OPERATION PROCEDURES:
1. AUTO ON/OFF
 The system turns on when any key is pressed or when
there is a signal incoming from the speed sensor.
 The system turns off automatically when there is no
signal incoming from the speed sensor or if the trainer
is inactive for longer than 4 minutes.
2. RESET
The unit can be reset by either changing battery or pressing
the MODE key for 3 seconds.
3. MODE
Choose SCAN or LOCK if you do not want the scan mode; press the MODE key to select a program.
FUNCTIONS:
1. TIME: Select TIME by pressing the MODE key. Accumulates the workout time from 00:00 to 99:59.
Users can also preset the target time.
2. SPEED: Select SPEED by pressing the MODE key. Maximum speed is 99.9 KM/H or MILE/H.
3. DISTANCE: Select SPEED by pressing the MODE key. The distance of each workout will be displayed.
4. CALORIE: Select CALORIE by pressing the MODE key. Accumulates the calories burned from 0 to
9999.
5. ODOMETER (IF A PART OF THE MODEL): Select ODOMETER by pressing the MODE key. The
total accumulated distance will be shown.
6. PULSE (IF A PART OF THE MODEL): Select PULSE by pressing the MODE key. It displays the
current heart rate in beats per minute. Place the palms of your hands on both of the contact pads (or put on
the ear-clip) and wait for 30 seconds for the most accurate reading.
SCAN: Each function will be shown for 4 seconds.
BATTERY: If the computer shows confusing values, remove the batteries and insert them again.
00:00-99:00
0-99.9KM/H
0.00-9999KM
0.0-9999KCAL
0.0-9999KM (ML)
0, 40 - 240BPM
EN