EN
ASSEMBLY INSTRUCTIONS
STEP 1:
Tighten the front and rear stabilizers (3 & 4) to the main frame (1) with carriage bolts (12),
spring washers (52), arc washers (13) and acorn nuts (14).
STEP 2:
Connect extension wire (18) to sensor wire (20) together, and then connect the cable of
tension controller (17) to the hook of the tension cable (19) as shown in picture A. At last,
tighten the handlebar post (2) to the main frame (1) with inner hex bolts (16), spring
washers (52) and arc washers (13).