Record Button; Stream Button - Datavideo HS-1600T Instruction Manual

Record function is
Blinking Red
activating or resetting
Solid Red Record function activated

Record Button

Press the RECORD button to start/stop recording.
Start recording
 When idle, the RECORD button is solid white.
 Press and hold the RECORD button for approximately 2 seconds.
 When the record function is activating, the RECORD button turns from solid white, then
blinking red and finally to solid red.
 When the RECORD button is solid red, this indicates that the record function has been
successfully activated.
Note: The RECORD button is disabled in the Stream Only mode.
Stop recording
 While recording, the RECORD button is solid red.
 Press and hold the RECORD button for approximately 2 seconds.
 When the record function is terminating, the RECORD button turns from solid red, then
blinking red and finally to solid white.
 When the RECORD button is solid white, this indicates that the record function has been
successfully terminated.

Stream Button

Press the STREAM button to start/stop streaming.
Start streaming
 When idle, the STREAM button is solid white.
 Press and hold the STREAM button for approximately 2 seconds.
 When the stream function is activating, the STREAM button turns from solid white, then
blinking red and finally to solid red.
 When the STREAM button is solid red, this indicates that the record function has been
successfully activated.
Note: The STREAM button is disabled in the Record Only mode.
Stop streaming
 While streaming, the STREAM button is solid red.
 Press and hold the STREAM button for approximately 2 seconds.
 When the stream function is terminating, the STREAM button turns from solid red, then
blinking red and finally to solid white.
Stream function is
activating or resetting
Stream function
activated
76
Record/Stream functions
are activating or resetting
simultaneously
Record/Stream functions
are activated
simultaneously