Monitor; Video Streaming Server - Datavideo HS-1600T Instruction Manual

Note 3: There is no guarantee that the HS-1600T supports all USB disks. When you see all buttons of
the program and preview rows illuminate pink or greenish pink, this indicates that the disk file read
error has occurred. Please try using other USB flash drive brands.

Monitor

To update the HS-1600T Monitor, you will need:
 The latest firmware for the HS-1600T Monitor.
This firmware file can be obtained from your local Datavideo office or dealer or product page.
 USB 2.0 pen drive with a USB A connector.
 HS-1600T x 1
 48V Power adapter x 1
Update Procedure
1. Unzip / extract the supplied zipped archive or rar folder.
2. Wipe the contents of the USB 2.0 pen drive so it is empty.
3. Transfer / copy the unzipped / extracted file to the USB 2.0 pen drive; make sure the file name
is renamed to MSTFLASH.bin.
4. Plug the USB 2.0 pen drive into the USB 2.0 port labelled MONITOR F/W
UPGRADE on the front of the monitor button panel.
5. Reboot HS-1600T and the update will start automatically.
6. The HS-1600T Monitor will reboot itself at the end of the process.
Note: The USB port can also be used to power the connected USB LED light.

Video Streaming Server

To update the video streaming server, you will need:
 The latest firmware for the video streaming server.
This firmware file can be obtained from your local Datavideo office or dealer or product page.
 HS-1600T x 1
 48V Power adapter x 1
Update Procedure
1. Visit the official product page
download the latest firmware file.
2. Login the NVS-31 web interface, then click the System tab to open the system configuration page.
3. Scroll down to Firmware Update then click the Browse button to search for the latest firmware
file on the PC's hard disk.
https://www.datavideo.com/tw/product/HS-1600T where you can
84