Position X; Position Y; Split Source; Border Size - Datavideo HS-1600T Instruction Manual

Position X

Adjusting Position X moves the PIP window horizontally. Pressing the up or down arrow button on the
control panel allows the user to either decrement or increment Position X by 1. To change the value
at an accelerated rate, simply press and hold the up or down arrow button.

Position Y

Adjusting Position Y moves the PIP window vertically. Pressing the up or down arrow button allows
the user to either increment or decrement Position Y by 10. Press and hold the up or down arrow
buttons to change the value at an accelerated rate.

Split Source

After the PIP window is activated, pressing the Split button will split the PROGRAM output display
into two with the program out view on the left and the PIP view on the right. The Split source, i.e. the
program out view, can be selected in this option. The available split sources are listed as follows:
 Black
 Input 1
 Input 2
 Input 3
 Input 4*
 Background
 Color Bar

Border Size

The Border Size generally allows the user to select an appropriate PIP border width. Setting the
Border Size to OFF turns the PIP border off. Setting the border size to small selects a thin border;
middle will yield a medium size width; large is the maximum PIP border width.

Border Color

The user is allowed to assign a PIP border color. The available colors are listed as follows:
 White
 Yellow
 Cyan
 Green
 Magenta
 Red
 Blue
 Black
*Note: Select Input 4 if you would like to use the video source connected to the HDMI input.

3.3 PIP Crop

The PIP Crop basically adjusts the PIP window borders. You can adjust each side individually (Left /
Right / Top / Bottom) or all four sides at the same time (Size).
Main Sub-Menu
Size
Left
PIP Crop
Right
Top
Options or Values
0 – 100%
0 – 100%
0 – 100%
0 – 100%
26
Default Value
0
0
0
0