Arpeggio Pattern Edit (Creating An Original Arpeggio Pattern) - Roland V-Synth GT Owner's Manual

Arpeggio Pattern Edit (Creating an Original Arpeggio Pattern)

You can create your own arpeggio pattern that specifies how an arpeggio will be sounded. This gives you even more
interesting ways to use arpeggios.
An arpeggio pattern is a set of data that can be up to 32 steps (horizontally) x 16 lines (vertically).
An arpeggio pattern can be saved for an individual patch as part of the patch settings. This means that you can
create a patch designed specifically for that arpeggio pattern.
About the Pattern Edit Window
1.
Access the Arpeggio screen (p. 69).
2.
Touch <Edit>.
fig.05-41-ps.eps
The Pattern Edit window will appear.
fig.02-09a.e
Cursor
State
Note/CC
(Note/Control Change)
<Edit>
Pattern input area
Specifies the status of each line.
NOTE: Note pitch
CTRL: Control change
Specifies the note number or control change number assigned to each line. If Status is
"NOTE," this will be a note number (C-1–G9). If Status is "CTRL," this will be a control
change number (0–127).
Patch Mode (Editing a Patch)
71