Adding Tones; Saving Tones To A Usb Flash Drive; Importing The Tones Into The Jupiter-X - Roland JUPITER-X Reference Manual

Selecting Sounds

Adding Tones

Tones that you downloaded or exported from another device can
be imported into the JUPITER-X as additional tones.
* The model of an imported tone is saved as

Saving Tones to a USB Flash Drive

1 .
By downloading, or by using the export function of
another device, prepare an SVZ file containing the
tones that you want to import into the JUPITER-X .
2 .
Connect a USB flash drive to the computer .
* If you're using the USB flash drive for the first time, format it on the
JUPITER-X.
&
"Formatting a USB Flash Drive
3 .
Save the SVZ file in the ROLAND/SOUND folder of the
USB flash drive .
4 .
Disconnect the USB flash drive from the computer,
and connect it to the JUPITER-X .

Importing the Tones into the JUPITER-X

1 .
Press the [MENU] button .
2 .
Use the [1] knob to select
the [ENTER] button .
You can also make this selection by using the
buttons instead of the [1]
3 .
Use the [1] knob to select
press the [ENTER] button .
4 .
Use the [1] knob to select the file that contains the
tones you want to import, and press the
button .
The number of tones saved in the file is shown in parentheses.
5 .
Use the [1] knob to select each tone that you want to
import, and use the [2] knob
If you want to select/deselect all tones, hold down the
button and operate the [2]
If you want to select/deselect a specified range of tones, press
the [ENTER] button at the beginning of the range, and then
hold down the [SHIFT] button
the end of the range.
6 .
Press the PAGE [>] button .
7 .
Use the [1] knob to select the import-destination
tone, and press the [ENTER] button
mark .
NOTE
5
Tones that are used in a scene have an
5
Please be aware that the tone(s) selected as the import-destination will be
overwritten.
5
If the import-destination tones are fewer than the import-source tones, not all
of the selected tones are imported.
5
The number of tones is shown in the upper right of the screen.
Number of import-destination/import-source tones
5
If there are tones named "INIT TONE,"
import-destinations (a check mark is added automatically).
* Even if it is an edited tone, it is automatically selected as an import-
destination tone if the tone name is
5
If you want to keep a tone, remove the check mark.
8 .
Press the PAGE [>] button .
16
"NO ASSIGN."
" (p. 49)
(FORMAT USB MEMORY)
"UTILITY," and then press
PAGE [ ] [ ]
knob.
"IMPORT TONE," and then
PAGE [>]
to add a check mark .
knob.
and press the [ENTER] button
to add a check
"*" indication.
they are automatically selected as
"INIT TONE."
9 .
To execute, use the
press the [ENTER]
When the import is completed, the indication
Completed!"
NOTE
Never turn off the power or disconnect the USB flash drive
while a message such as
is in progress.
[SHIFT]
at
[2] knob to select
button .
appears.
"Executing..." is shown and processing
"OK," and then
"Import Tone