Playing A Pattern You Entered - Roland JUPITER-X Reference Manual

I-ARPEGGIO
Operations in STEP EDIT
Item
Move left/right between steps
Change the velocity value
Move vertically
Move between pages
Exit step edit
Specify the note
Specify a step and turn the note on
Turn the currently selected note
on/off
Enter a tie
Move between parts
Erase all data from the currently
selected part
Erase all data of the selected note
Erase all data of the selected step

Playing a Pattern You Entered

The data that you edit in STEP EDIT can actually be used for
arpeggio performance.
1 .
Press the [MENU] button .
2 .
Use the [1] knob to select
press the [ENTER] button .
The ARP PART EDIT screen appears.
3 .
Use the [1] knob to select
"ON" or "KEYSHIFT . "
Parameter Value
ON
Step Mode
KEYSHIFT
22
Operating the Unit
[1] knob
[2] knob
PAGE [ ] [ ] buttons
PAGE [<] [>] buttons
[EXIT] button
Press a key
[1]–[16] button
[ENTER] button
Move the cursor to the beginning of the tie,
then hold down the [SHIFT] button and press
the [1]–[16] button corresponding to the last
step of the tie.
[PART] button 0 select the current part
[S1] button
While holding down a key + [S1] button
[1]–[16] button + [S1] button
"ARPEGGIO EDIT," and then
"Step Mode," and set it to
Explanation
The notes are played according to the
arpeggio performance, as specified by the
pattern that you created in STEP EDIT.
The notes are played according to the
arpeggio performance and playing
sound, using the pattern that you
created in STEP EDIT .