Roland JUPITER-X Reference Manual page 46

Settings for the Entire Unit
Parameter Value
[1] knob [2] knob
Wheel2 Source SCENE, SYS
For the values,
refer to "List of
Wheel2 functions that can
be assigned to the
controllers"
PART Btn Asgn
1-5
1-5+(S)
No Assign, PartSel,
6-10
Part+KeySw, KeySw,
PartSw, ArpSw,
6-10+(S)
EfxSw
11-15
11-15+(S)
SYSTEM COLOR SET
(*)
Color Set 1–10
46
Explanation
Specifies whether the function assigned to
the [WHEEL 2] wheel follows the setting of the
currently selected scene (SCENE) or follows the
system setting (SYS).
Specifies the function assigned to the [WHEEL
2] wheel.
Assign the function of the [1]–[5] ([6]–[10])
buttons and their function when pressed while
holding down the [SHIFT] button.
No Assign: Nothing is assigned.
PartSel: Specifies the current part that is
controlled from the panel or in the screen. The
part played by the keyboard does not change.
Part+KeySw: Simultaneously operates
the current part and the Keyboard SW,
allowing you to play the selected part from
the keyboard. By pressing multiple parts
simultaneously, you can turn the Keyboard SW
on for multiple parts.
KeySw:
Specifies the keyboard switch,
switching the part that is played from the
keyboard.
PartSw: Switches on/off whether the part
produces sound. You can use this in a DJ-like
manner to add or remove parts while you
perform.
ArpSw: Specifies whether each part is played
by the arpeggio.
EfxSw: From the left side, the buttons switch
MFX, DRIVE, REV, DLY, and CHO on/off for all
parts simultaneously.
Saves the color settings in each Set number,
and lets you switch between sets.
Parameter Value
[1] knob [2] knob
Arp L Off
Arp R Off
Func L Off
Func R Off
Sc1–4 Off
Sc5-8 Off
Sc9-12 Off
Sc13-16 Off
Model Off
Categ Off
User Off
Part Off
Part+KeySw Off
KeySw Off
PartSw Off
ArpSw Off
EfxSw Off
No Assign
St1–4 Off
St5-8 Off
St9-12 Off
Off, O, Y, Y(b), W,
W(b), G, G(b), B,
St13-16 Off
B(b), R, R(b), V, V(b),
W2, R2
Arp L On
Arp R On
Func L On
Func R On
Sc1–4 On
Sc5-8 On
Sc9-12 On
Sc13-16 On
Model On
Categ On
User On
Part On
Part+KeySw On
KeySw On
PartSw On
ArpSw On
EfxSw On
St1-4 On
St5-8 On
St9-12 On
St13-16 On
* The SYSTEM COLOR SET parameters are located in the SYSTEM COLOR
SET screen which you can access from the SYSTEM screen by pressing the
PAGE [>] button several times.
&"Editing the System Settings
Explanation
Specifies the illumination color of buttons
to which a function is assigned when the
corresponding function is on or off.
Off: Unlit
O: orange,
Y: yellow,
W:
white,
G: green,
B:
blue,
R: red,
V:
violet,
W2: high-brightness white,
R2:
high-brightness red
(b) indicates blinking.
" (p. 43)
(System)