Initializing A Tone (Tone Initialize) - Roland JUPITER-X Reference Manual

Editing a Tone (TONE EDIT)
Initializing a Tone
Here's how to initialize the tone of the current part. The initial state
that is specified differs depending on the model that is selected for
that part.
1 .
Press the [MODEL BANK] button
select mode .
2 .
Press the PAGE [ ] button
model name .
3 .
Turn the [2] knob to select the model that you want to
use from its initial state .
4 .
Press the [WRITE] button .
The WRITE MENU screen appears.
5 .
Use the [1] knob or [2] knob
INITIALIZE," and then press the
28
(TONE INITIALIZE)
to switch to tone
to move the cursor to the
to select "TONE
[ENTER] button .