Assembly Instruction - Master V-100 Owner's Manual

ASSEMBLY INSTRUCTION

STEP 1：
4. Fix the Connect Tube (42) to the Left Hand Side Frame (2) and the Right Hand Side
Frame (3) with Bolt (11) and Arch Washer (45).
5. Use the Quadrate Neck Bolts (16), Bolt (28), Washers (17), Nylon Nut (21) and the
Cap Nuts (18) to fix the Seat Rail (1) with the Left Hand Side Frame (2) , Connect
Tube (42) and the Right Hand Side Frame (3).
6. Fix the Rear Tube (37) to the Seat Rail (1) with the Hex bolt (39), Flat Washer (40)
and Nylon Nut (41), and then insert the Pin (38).
STEP 2:
First, fix the Seat (8) to the Slide Seat Support (4) with the Bolt (25). Second, put the well
assembled Seat (8) onto the Seat Rail (1). Then, use the Hex Bolts(44）, washers (17),
Nylon Nuts (21) drill through the Roller (23) and fix them up to the Slide Seat Support (4).
23
EN