Assembly Instruction - Master V-100 User Manual

Figure1: (MAIN FRAME ASSEMBLY)
1. Slide the Rubber Feet (5) onto the side frames (3&4). Lay the side frames (3&4) on the floor. Insert the
Side Frames (3&4) onto the seat Rail(1) and use 4pcs of Bolts(6), 4pcs of Washers(8), and 4pcs of
2. Cap nuts (7) to fix it.
3. Put the End Caps (29) onto the end of the Side Frames (3&4).
4. Attach the Seat (9) onto the Seat Support (2). Secure it with 4pcs of Screws (10).
5. Attach Rollers (12) to the Seat Support (2), insert the Long Bolts (14) through the hole on Seat Support
(2), and tighten with Nylon Nuts (15).
6.
Slide the Seat Support (2) onto the Seat Rail (1). Insert the Long Bolts (4), Washers (8) through the hole
on Seat Support (2) and 2pcs of Rollers (13), tighten them with Washers (8) and Nylon nut (15).

ASSEMBLY INSTRUCTION

5
EN