Master V-100 Owner's Manual page 26

SPECIFICATIONS:
TIME---------------------------------------------------00:00 - 99:59 MIN: SEC
DISTANCE------------------------------------------------0.00 - 99.99 KM OR ML
COUNT---------------------------------------------------0 - 9999 TIMES
CALORIES------------------------------------------------0 - 9999 KCAL
TOTAL COUNT------------------------------------0 - 9999 TIMES
KEY FUNCTION:
MODE: To select the function you want. Hold the key for 4 seconds to
have all function values reset(total reset).
RESET: To let the value reset.
OPERATION PROCEDURES:
AUTO ON/OFF .The monitor will be automatically shut off if there is no
signal coming in for 4 minutes. The monitor will be auto-powered
when start exercise or press the key.
FUNCTION:
<1>.TIME( TMR): Auto-memorize the workout time while exercising.
<2>.DISTANCE (DST): Accumulate the distances while exercising.
<3>.COUNT (CNT): Accumulate the steps while exercising.
<4>.CALORIES (CAL): Auto-memorize calories amount consumed while
exercising.
<5>.TOTAL COUNT (TOTAL): Display the total counts while exercising.
When the signal input, it start the count up on the original data.
The TOTAL COUNT can't be reset(by RESET key)except you replace
battery once.
<6>.SCAN : Automatically scan through each function between
TIME②DISTANCE③COUNT④T-COUNT⑤CALORIES.
①
BATTERY: If there is a possibility to see an improper display on the
monitor, please replace the batteries to have a good result. This monitor
uses two "AA" battery. You can replace the batteries accordingly.
Exercise Computer
26
EN