Call Transfer Feature; Chain Dialing - Uniden EXT1265 Owner's Manual

Call Transfer Feature

To transfer from the handset to the base
1 Press
int'cm/select
intercom tone sounds on the base.
2 Press
int'cm/page
but the caller is still on hold.
3 To transfer the call to the base, press
the transfer, press
To transfer from the base to the handset
1 Press
int'cm/page
intercom tone sounds on the handset.
2 Press any key on the handset. The intercom mode is activated, but the
caller is still on hold.
3 To transfer the call to the handset, press
transfer, press
talk

Chain Dialing

The memory locations on the handset are not limited to phone numbers,
you may want to store in memory a group of numbers (up to 20 digits)
that you need to enter once your call connects. This is referred to as
Chain Dialing.
on the handset. The caller is put on hold and the
or on the base. The intercom mode is activated,
talk
on the base.
on the base. The caller is put on hold and the
on the handset.
on the handset. To cancel
on the base. To cancel the
T E L E P H O N E F E A T U R E S [ 31 ]