Setting Up The Phone - Uniden EXT1265 Owner's Manual

900mhz digital spread spectrum cordless with interchangeable face plates
Table of Contents

Advertisement

Setting up the Phone

Do the following steps:
A. Choose the best location
B. Install the battery pack
A. Choose the best location
Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in
the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS. Here are some important guidelines you
should consider:
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid television sets and
other electronic equipment
Choose a central location
• The location should be close to both a phone jack and a continuous power outlet that is
not switchable.
• Keep the base and handset away from sources of electrical noise such as motors, microwave
ovens, and fluorescent lighting.
• Be sure there is sufficient space to raise the base antenna to a vertical position.
• The base can be placed on a flat surface such as desk, tabletop, or mounted on a standard
wall plate.
[ 6 ]
G E T T I N G S T A R T E D
C. Connect the base unit
D. Choose the dialing mode
Avoid noise sources such as a window
by a street with heavy traffic
Avoid microwave ovens
Avoid excessive moisture,
extremely low temperatures,
dust, mechanical vibration, or shock
Avoid personal computers
Avoid other cordless telephones

Advertisement

Table of Contents
loading

Table of Contents