Using One Touch Voice Mail Access - Uniden EXT1265 Owner's Manual

Using One Touch Voice Mail Access

If you subscribe to voice mail service, you can use your EXT1265 to access
your voice mailbox. The message light on the base and handset of your
phone flashes whenever you have messages waiting in your voice mailbox.
Just program the
voice mail
can get your messages at the touch of a button. (The voice mail service
provider will supply you with the access number. This number may be
simply a phone number. Refer to the provider's literature.)
Programming your Voice Mail Access Number
1 When the phone is in the standby mode, press
2 Press to move the pointer to "
ª
".
Then press
int'cm/select
stored a number, the following display appears:
Use the and
•
" " option. Press
the option.
3 Enter your personal access number.
4 Press
int'cm/select
and the following display appears.
With the base
1 Press and hold
2 Enter your personal access number.
3 Press again. You will hear a confirmation tone.
or key with your access number and you
. If you have previously
to move the pointer to the
ª
int'cm/select
. You will hear a confirmation tone
in standby mode, until a tone sounds.
.
menu
to select
note
You must subscribe to
voice mail service from
your telephone company
in order to use this
feature. The voice mail
service company will
provide you with the
access number.
B A S I C S [ 21 ]