Message Waiting Indicator - Uniden EXT1265 Owner's Manual

[ 22 ] B A S I C S
Dialing your Voice Mail Service
Once you've programmed your personal access number, you can dial your mailbox
with the touch of a button. When you have messages, simply pick up the
handset and press voice mail
the dial tone, and then press
base. If you have not entered the access number or it has been deleted, when
you press or
voice mail

Message Waiting Indicator

The voice mail LED indicator on the handset and base is designed to work with
voice mail service provided by your local telephone company. The indicators
flash when you have new voice messages. You may need to occasionally reset
the indicator if it remains on after you've retrieved your messages. To reset the
indicator, return the handset to the base and press and hold
base.
Deleting the Voice Mail Number
1 When the phone is in the standby mode, press
2 Press to move the pointer to "
ª
". Then press
3 Use the and
•
ª
" " option. Press
select the option.
4 Press to select "
•
5 Press
int'cm/select
confirmation tone and the following display appears.
With the base
1 Press and hold
2 Press again. You will hear a confirmation tone.
or press on the base. Or press
, or press
voice mail
, an error tone sounds.
.
int'cm/select
to move the pointer to
int'cm/select
".
or . You will hear a
delete/channel
in standby mode, until a tone sounds.
, listen for
talk
and press on the
int'cm/page
.
menu
to
on the