Entering Your Area Code - Uniden EXT1265 Owner's Manual

4 Use and to move the pointer between "
•
ª
" ". For "
or " " depending upon the type of service to which
you subscribe.
Press to make your selections and a confirmation tone
int'cm/select
will sound. To complete the setting, make sure to return the handset to
the base.

Entering your Area Code

If you enter a 3-digit area code number in the "
local area code does not appear in Caller ID messages. For calls received
from outside your local area code, you will see a full 10-digit number.
1 When the phone is in the standby mode, press
2 Press to move the pointer to "
ª
Then press
int'cm/select
3 Use to move the pointer to "
ª
4 Use the number keypad (0 to 9) to enter the 3-digit
area code.
5 Press , and a confirmation tone will sound.
int'cm/select
", choose "
to select. The Caller ID setting screen appears.
", then press
" or
" ,"
" option, your
.
menu
".
int'cm/select
C A L L E R I D O P T I O N S [ 13 ]
"
note
• If your calling area
requires 10-digit
dialing, do not program
this option.
• When the area code has
already been stored in
memory, the stored area
code will be displayed.
.
To change it, use the
delete/channel and
number keypad to enter
the new area code.
• To complete the setting,
press
int'cm/select
then return the handset
to the base unit.