Entering Your Area Code; Choosing The Dialing Mode - Uniden EXI5560 Owner's Manual

Entering Your Area Code

If you can make a call by dialing only 7 digits (instead of 10), you can program your
local area code in your phone. If you get a call from within your area code, you'll
only see the 7-digit phone number. If you get a call from outside your area code,
you'll see all 10 digits.
1) When the phone is in standby mode, press and hold the
2) Press the M key twice to select
3) Press the select key. If an area code was already stored, the
4) Use the number keys (0 - 9) to enter the 3-digit area code.
5) Press the select key. A confirmation tone sounds.
6) Press the end key to complete the setting. The handset returns to standby mode.

Choosing the Dialing Mode

Your phone can communicate with the telephone network in two different ways: tone
dialing and pulse dialing. These days, most phone networks use a method called tone
dialing, so your phone comes programmed for tone dialing.
If your phone company uses pulse dialing, you'll need to change your phone's dial
mode. There's an easy way to tell: try making a call. If your call connects, your
phone's setting is fine. If not, follow the steps below:
[ 16 ] B A S I C S E T U P
call id/menu key. The following screen appears.
phone will display it.
If you make an error, use the delete/chan key to backspace.
.
www.uniden.com