Structuring The Documentation - Bosch Rexroth IndraControl S67 Series Application Description

DOK-CONTRL-S67DO8M122A-AP03-EN-P
Rexroth IndraControl S67 Digital Module 8 Outputs – 2.0 A (4×M12)
Purpose
1.4

Structuring the Documentation

Mounting
Product
Selection
phases (assembly/installation)
Presales Aftersales
Design engineer
Mechanic/
electrician
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1-1: Assigning this documentation to the target groups, product phases
and target group activities
This documentation is intended for users commissioning a decentralized digi‐
tal output module of type S67-DO8-M12-2A. This documentation contains
general information on the output module. Mounting and cabling of the output
module are also described. The basic commissioning steps and the configu‐
ration of the IndraControl S67 station are then explained.
The first part of the documentation contains important information on the in‐
tended use as well as information on the safety instructions
portant Instructions on Use" on page 9
Instructions" on page 11).
For a short overview on the structure and the functions of the digital output
module, refer to chapter 4 "Device Description" on page
For the mounting description of the module, refer to
Module" on page 23.
For information on data and supply cables, refer to
Data and Supply Cables" on page
For the commissioning of the module, refer to
page 37.
For information on the process images of the digital output module, refer to
chapter 8 "Process Images" on page
For the parameterization of the module, refer to
on page 43.
For the diagnostic options regarding the digital output module, refer to
ter 10 "Diagnostics via LED Signals" on page
For information on the module exchange, refer to
and Service" on page 51.
For information on the module usage in safety applications, refer to
12 "Using Feedback-Free Module in Safety Applications" on page
For information on the accessories for the digital output module, refer to
chapter 13 "Accessories" on page
Bosch Rexroth AG
Engineering Commissioning
Programmer
Commissioning engineer
Technologist
Process specialist
Unpack Parameterize Optimize
Mount Program Test
Install Configure
Simulate
and chapter 3 "Using the Safety
31.
chapter 7 "Commissioning" on
39.
chapter 9 "Parameterization"
47.
59.
7/69
About this Documentation
Operation Decommissioning
Machine
operator
Maintenance Mechanic/
technician electrician
Service Disposal company
Operate Dismount
Maintain Dispose
Remove
faults
Create
the NC program
(chapter 2 "Im‐
13.
chapter 5 "Mounting
chapter 6 "Connecting
chap‐
chapter 11 "Maintenance
chapter
53.