26/69
Bosch Rexroth AG
Mounting Module
5.6
Mounting on Profile Rail (only with Bosch Rexroth Accesso‐
ries)
5.6.1
Fastening Profile Adapter on Module
Rexroth IndraControl S67 Digital Module 8 Outputs – 2.0 A (4×M12)
Fig. 5-3:
Mounting the mounting rail adapter
In addition to the fastening using a mounting rail adapter, the S67-DO8-
M12-2A module can be fastened to a profile rail using a profile adapter and
slot nuts. The system has to support this fastening type. The slot nuts are not
included in the scope of delivery.
Screw the S67-DO8-M12-2A module with the profile adapter using the M4
threaded screws provided as shown in the figure below.
Fig. 5-4:
Fastening a profile adapter
DOK-CONTRL-S67DO8M122A-AP03-EN-P
50
51
52