Commissioning; General Information - Bosch Rexroth IndraControl S67 Series Application Description

DOK-CONTRL-S67DO8M122A-AP03-EN-P
Rexroth IndraControl S67 Digital Module 8 Outputs – 2.0 A (4×M12)
7

Commissioning

7.1

General Information

NOTICE
If connections are not closed with protective caps, liquid or dirt can enter and
thus destroy the S67-DO8-M12-2A module. Protect all connections that are
not required with protective caps to comply with protection class IP 67.
Before commissioning the IndraControl 767 station, check the following:
● a field bus coupler of the IndraControl S67 series
M12-2A module are mounted properly
● all required supply, sensor or actuator and S-BUS cables as well as the
S-BUS connection are screwed tightly at the provided connections (see
chapter 6 "Connecting Data and Supply Cables" on page
● an appropriate potential equalization was executed at the system
● the shielding was executed correctly
1)
Refer to the application descriptions of the field bus couplers (IndraControl S67)
Bosch Rexroth AG
Open connections!
1)
37/69
Commissioning
and the S67-DO8-
31)