Setting a Security Code or Personal Identification Number (PIN)
To play your messages from a remote location, you will need to enter a two-digit security code or Personal
Identification Number (PIN). The default security code is 80.
From the base
1. Press
[menu/clock]
twice. The current security
code appears on the base and it is announced.
2. Press
[
/select]
or
[
/select]
desired number appears. Press and hold
[
/select]
or
[
/select]
to quickly scroll
through the numbers on the display.
3. Press
[set]
to select the security code. A
confirmation tone sounds; the system
announces the new security code.
From the handset
1. Press
[menu/clear]
menu, and then the SECURITY CODE
until the
submenu.
2. Use the number keypad (
a two-digit security code (00-99) .
3. Press
[select/
tone.
[51]
. Select the ANSW. SETUP
[0]
through
[9]
) to enter
]
. You will hear a confirmation