Activating.the.message.alert; Activating.call.screening; Setting A Security Code Or Personal Identification Number.(Pin) - Uniden TRU9380-3 Owner's Manual

Activating the Message Alert
The.message.alert.feature.sounds.a.short.alert.tone.every.5.seconds.whenever.you.have.a.new.message.
To.turn.on.the.message.alert:
From the handset:
) Press.[menu/clear]..Select.the.ANSW..SETUP.menu,.and.then.the.MESSAGE.ALERT.submenu.
2) Move.the.cursor.to.select.ON.or.OFF.
3) Press.[select/ ]. You will hear a confirmation tone.
Activating Call Screening
Your.phone.allows.you.to.listen.to.callers.leaving.you.a.message..This.call.screen.feature.can.be.turned.on.or.off.
From the handset:
) Press.[menu/clear]..Select.the.ANSW..SETUP.menu.and.then.the.CALL.SCREEN.submenu.
2) Move.the.cursor.to.select.ON.or.OFF.
3) Press.[select/ ]. You will hear a confirmation tone.
Setting a Security Code or Personal Identification Number (PIN)
To.play.your.messages.from.a.remote.location,.you.will.need.to.enter.a.two-digit.security.code.or.Personal.
Identification Number (PIN). The default security code is 80.
From the handset:
) Press.[menu/clear]..Select.the.ANSW..SETUP.menu,.and.then.the.SECURITY.CODE.submenu.
2) Use.the.number.keypad.([0].through.[9]).to.enter.a.two-digit.security.code.(0-99).
3) Press.[select/ ]. You will hear a confirmation tone.
46