Symptom
Suggestion
Can't make or receive calls.
•
Make sure that you are not too far from the base.
•
Make sure the line is not in use. If an outside call is already using a line, you cannot use
that line to make another outside call.
•
Check both ends of the base telephone line cord.
•
Make sure the AC adapter is plugged into the base and wall outlet.
•
Disconnect the AC adapter and reconnect.
•
Change the Digital Security Code (see
Severe noise interference.
•
Keep the handset away from microwave ovens, computers, remote control toys, wireless
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical
appliances.
•
Move to another location or turn off the source of interference.
The Caller ID does not
•
The call was placed through a switchboard.
display.
•
Call your telephone provider to verify your Caller ID service is current. There may be a
problem with your Caller ID service.
The handset doesn't ring or
•
Make sure that you are not too far from the base.
receive a page.
•
Charge the battery in the handset for 15 to 20 hours by placing the handset on the base
or charging cradle.
•
Change the Digital Security Code (see
You cannot register the
•
Charge the battery pack in the handset for 15 to 20 hours.
handset at the base.
•
Change the Digital Security Code (see
Changing the Digital Security Code
Changing the Digital Security Code
Changing the Digital Security Code
[62]
on page 61).
on page 61).
on page 61).