Setting Up The Phonebook; Creating Phonebook Entries - Uniden DSS3435+1 Owner's Manual

Note: The handset first clears its registration information from the base and then deletes
the link to the base from its own memory. The handset will now display MODELS VARY!
CHARGE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER'S
MANUAL. If the handset cannot contact the base, it will display OUT OF RANGE. If this
happens, see Resetting the Handset Without the Base
registering the handset, see page 20.

Setting Up the Phonebook

Your handset can store up to 100 names and numbers in your phonebook . Your phone shares memory between
your phonebook and Caller ID entries. Once you store 100 phonebook entries, Caller ID information will not be
stored and will only display at time of new incoming call. When all the phonebook entries are full, you will hear a
beep and MEMORY FULL appears. You cannot store any additional names and numbers unless you delete some
of the existing ones.
You can also use the phonebook entries or speed dial memory to store a group of numbers (up to 20 digits) that
you may need to enter once your call connects. This is referred to as chain dialing.

Creating Phonebook Entries

To store names and numbers in your phonebook, please follow these steps:
1. When the phone is in standby mode, press
2. To create a new phonebook entry, move the cursor to select STORE
NEW, and press [select/ ] . STORE/EDIT NAME appears.
3. Enter the name for this entry (STORE/EDIT NAME).
Use the keypad to enter a name for this entry; the name can contain up
to 16 characters. (See Entering Text from Your Handset
instructions on entering text.) If you do not want to enter a name for this entry, your phone will store this entry
as <NO NAME>. Press [select/
on page 60. For instructions on
[ ] .
on page 12 for
] when you are finished.
[22]