Setting The Day & Time - Uniden DSS3435+1 Owner's Manual

Setting the Day & Time
If you do not set the clock on your answering system, your messages may not have the correct time and day
stamp.
You can set the day and time from the handset or the base.
From the base
1. Press [menu/clock] .
2. Press [ /select] or [ /select]
and the message counter shows the corresponding number (1 for
Sunday, 2 for Monday, etc.).
3. Press [set] to select the day.
4. Press [ /select] or [ /select]
setting. The numbers 1 through 12 appear on the base as each
hour is announced.
5. Press [set] to select the hour.
6. Press [ /select] or [ /select]
setting. The numbers 00 through 59 appears on the base as each
minute is announced.
7. Press [set] to select the minute.
8. Press [ /select] or [ /select]
PM setting. The message counter displays A or P.
9. Press [set] to select the AM/PM setting. A confirmation tone
sounds, and the day and time are announced for your review.
until the correct day is announced
until you hear the correct hour
until you hear the correct minute
until you hear the correct AM or
[47]
From the handset
1. Press [menu/clear] .
2. Move the cursor to GLOBAL
SETUP and press [select/ ].
3. Move the cursor to DAY & TIME
and press [select/ ] .
4. Use [ ] and [ ] to select
the correct day, and press
[select/ ] .
5. Use [ ] and [ ] to select
the correct hour, and press
[select/ ]
.
6. Use [ ] and [ ] to select
the correct number of minutes,
and press [select/ ] .
7. Use [ ] and [ ] to select
AM or PM, and press
[select/ ] . You hear a
confirmation tone.