Setting A Security Code Or Personal Identification Number (Pin) - Uniden DCT7085 Series Owner's Manual

Setting a Security Code or Personal Identification Number (PIN)

To play your messages from a remote location, you will need to enter a two-digit security code or Personal
Identification Number (PIN). The default security code is 80.
From the base
1. Press [menu/cock] twice. The current security code appears
on the base and it is announced.
2. Press [ /select] or [
appears. Press and hold [
quickly scroll through the numbers on the display.
3. Press [set] to select the security code. A confirmation tone
sounds; the system announces the new security code.
/select] until the desired number
/select] or [ /select] to
51
From the handset
1. Press [menu/clear]. Select the
ANSW. SETUP menu, and then the
SECURITY CODE submenu.
2. Use the number keypad ([0]
through [9]) to enter a two-digit
security code (01-99) .
3. Press [select/ ] . You will hear a
confirmation tone.