Sign in today to find solutions:

Don't have an account? Sign up

Uniden DSS 2455 Quick Start Manual

Uniden bluetooth headset - wireless phone headset user manual.

 
DSS
2455/
2465
Digital Spread
Spectrum provides
the longest range,
Quick Start
the clearest sound
and the best privacy.
Guide

Summary of Contents

  • Page 1

    2455/ 2465 Digital Spread Spectrum provides the longest range, Quick Start the clearest sound and the best privacy. Guide...

  • Page 2

    UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM INSTALLATION & SAFETY Choosing the best location for your phone. When choosing a location for your phone there are a number of appliances the phone should not be near, and areas you should avoid. AVOID - Television sets and other electronic...

  • Page 3

    To AC adapter To AC outlet To telephone socket To TEL LINE Telephone line cord (supplied) Make sure the AC Adapter/s remains switched ON at all times. Use only the Uniden AC Adapter/s supplied with this unit. [ ii ]...

  • Page 4

    UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM 4) Set the base on a desk or tabletop. 5) Rise the antenna to a vertical position. Connecting the charger - DSS2465 only 1) Connect the AC adapter into the charging cradle and to a AC wall outlet. 2) Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward (see “Installing the...

  • Page 5

    UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM 3) Securely close the battery compartment cover by sliding it up until it snaps into place. Charging the handset 1) Place the handset in the charging cradle with the keypad facing up. The DSS2455 and DSS2465 series will only work with “AA” Ni-MH rechargeable batteries.

  • Page 6: Table Of Contents

    1/14/05 11:44 AM CONTENTS INSTALLATION & SAFETY QUICK START GUIDE CONTENTS GETTING STARTED Controls and Functions Uniden Company Philosophy Welcome Features Checking the Package Contents Terminology Mounting the Base Unit on a Wall Battery Maintenance Installing the Beltclip Headset Installation...

  • Page 7: Controls And Functions

    UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM CONTROLS AND FUNCTIONS Page 1 1. Handset Antenna 2. Headset Jack Cover 3. Beltclip Hole 4. Hands Free Speaker 5. Handset Battery Compartment 6. New Message LED 7. Handset Earpiece 8. LCD Display 12.

  • Page 8

    UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM 20. Base Speaker 33. Base Charging Contacts (repeat)/SELECT Key 34. Base Antenna (delete) Key 36. In use LED 24. Message Counter Display (answer on) Key 27. Charge LED 21 22 23 [ 2 ] Page 2 (volume) / (volume) /...

  • Page 9: Uniden Company Philosophy, Welcome

    To bring outstanding wireless communication products to people’s lives throughout the world. WELCOME Congratulations on your purchase of this Uniden DSS2455 or DSS2465 series Multi Handset Cordless System telephone. This unit is different from conventional cordless telephones. It can support up to 4 handsets. Using extra handsets (optional), you can establish a 4-way conference call (2 handsets-Base Speaker Phone-an outside line, or 3 handsets-an outside line).

  • Page 10: Features

    UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM FEATURES Great features of this cordless phone include: • Designed and Engineered in Japan • 2.4GHz Digital Spread Spectrum • Integrated Digital Answering Machine • Multi (4) Handset Capable (2 handsets Included (DSS2465 only)) •...

  • Page 11: Checking The Package Contents, Terminology

    UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM CHECKING THE PACKAGE CONTENTS Make sure you have received the following items in the package. If any of these items are missing or damaged, contact your retailer. • Base unit (1) • Handset [DSS2455 (1) / DSS2465 (2)] •...

  • Page 12: Mounting The Base Unit On A Wall, Battery Maintenance

    UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM MOUNTING THE BASE UNIT ON A WALL You can mount your base directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

  • Page 13: Installing The Beltclip

    • Do not remove or damage the battery casing. To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden adapter model specifically designated for this product, and “AA” rechargeable Ni-MH batteries. INSTALLING THE BELTCLIP To attach the beltclip Insert the beltclip into the holes on each side of the handset.

  • Page 14: Headset Installation, Display And Icons

    1/14/05 11:44 AM HEADSET INSTALLATION Your phone may be used with an optional headset, the Uniden HS910. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. DISPLAY AND ICONS Example of the standby mode display...

  • Page 15: About Soft Key Function

    UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM ABOUT SOFT KEY FUNCTION In the standby mode In the talk mode (Australia model) Soft key 1 Soft key 2 Soft key 3 Soft key 1 Soft key functions consists of soft key icons and soft keys (No. 1, 2, and 3). Each soft key corresponds to the icon displayed above, and each icon will be changed depending on the operation.

  • Page 16: Dss2455/dss2465 Flow Chart

    UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM DSS2455/DSS2465 FLOW CHART • From the standby mode Select a menu, then press the Play incoming OK soft key. messages remotely Setup the menu: (see page 52). • See page 37 for Caller ID. •...

  • Page 17

    UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM OK soft key Setup the menu OK soft key (see pages 21). Setup the menu (see pages 19-20). “ New Zealand model. Page 11 • From the Talk mode OK soft key OK soft key •...

  • Page 18: About The Menu

    UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM ABOUT THE MENU Most of the handset settings are set from the menu. The menu has 5 main menus (DirectLink Mode, Handset Setup, Answ. Setup, Global Setup, and System Reset) and submenus respectively. For Answ.

  • Page 19

    UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM Submenu name Auto Talk Allows you to answer the phone without pressing When the AutoTalk is set to On, simply remove the handset from the cradle and the phone automatically answers the call (see page 17). Anykey Answer Allows you to answer the phone without pressing When the Anykey Answer is On, you can answer a call by pressing any number...

  • Page 20

    UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM Global Setup If you change the setting in one of the handsets, you change the settings for all handset(s) in the Global Setup menu. Only one handset can change a setting at a time. Submenu name Name Tag (POP ID) Insert 0...

  • Page 21

    UP308BH (DSS2465) ENG OM 1/14/05 11:45 AM SETTING UP THE MENU Entering the Menu 1) Press the MENU soft key in the standby mode. 2) Use to move the pointer to a desired main menu (DirectLink Mode, Handset Setup, Answ. Setup, Global Setup, and System Reset). 3) Press the OK soft key to enter the menu.

  • Page 22

    UP308BH (DSS2465) ENG OM 1/14/05 11:45 AM DirectLink Mode Entering the Two Way Communication between the Handsets Anywhere without the Base 1) Enter the “ 2) Press the ENTER soft key to enter the . You will hear a confirmation tone, and “...

  • Page 23

    UP308BH (DSS2465) ENG OM 1/14/05 11:45 AM Selecting a Ringer Tone 1) Enter the “ ” menu, then the “ “Entering the Menu” on page 15). You can choose from 8 ringers or 8 melodies: - Ringers [Flicker, Clatter, Soft Alert, Wake Up, Light Bug, Beep Boop, Tone Board, Chip Chop] - Melodies [Beethoven’s Symphony #9 (Beethoven9), For Elise (Elise), We Wish You A Merry Christmas (Merry-...

  • Page 24

    UP308BH (DSS2465) ENG OM 1/14/05 11:45 AM Setting the Anykey Answer 1) Enter the “ ” submenu (see “Entering the Menu” on page 15). 2) Press “ ” or “ 3) Press the OK soft key and you will hear a confirmation tone. Setting the Banner 1) Enter the “...

  • Page 25

    UP308BH (DSS2465) ENG OM 1/14/05 11:45 AM Answering System Setup Setting a PIN Code 1) Enter the “ ” menu, then the “ ” submenu (see “Entering the Menu” on page 15). 2) Enter a two-digit PIN code (01-99) using the number keypad ( 3) Press the OK soft key.

  • Page 26

    UP308BH (DSS2465) ENG OM 1/14/05 11:45 AM Setting the Message Alert On or Off 1) Enter the “ ” submenu (see “Entering the Menu” on page 15). 2) Press 3) Press the OK soft key. You will hear a confirmation tone. Setting the Call Screen 1) Enter the “...

  • Page 27

    UP308BH (DSS2465) ENG OM 1/14/05 11:45 AM Global Setup Setting Name Tag (POP ID) 1) Enter the “ ” menu, then the “ ” submenu (see “Entering the Menu” on page 15). 2) Press to change the selection, “ or “ ”.

  • Page 28

    UP308BH (DSS2465) ENG OM 1/14/05 11:45 AM System Reset Deregister the Handset 1) Enter the “ “Entering the Menu” on page 15). 2) Press deregistered from the list, then press the OK soft key. 3) Press the OK soft key. You will hear a confirmation tone. When deregistration is complete, “...

  • Page 29: Making And Receiving Calls

    UP308BH (DSS2465) ENG OM 1/14/05 11:45 AM MAKING AND RECEIVING CALLS On the handset, you may also use the speakerphone while talking to an outside call. Using the handset speakerphone is called “hands-free conversation”. This feature allows you to easily communicate while performing other tasks, such as cooking. appears on the handset display during hands-free conversations.

  • Page 30: Placing A Call On Hold, Redialing A Call

    UP308BH (DSS2465) ENG OM 1/14/05 11:46 AM PLACING A CALL ON HOLD 1) During a call, press on the base). Once 10 seconds has passed or when you press the call will be put on hold. 2) To talk to the caller, press a handset (or return back to the call.

  • Page 31

    UP308BH (DSS2465) ENG OM 1/14/05 11:46 AM Redialing from Talk Mode 1) Press , then press the MENU soft key. 2) Select the number you dialed by following steps 2-3 in “Redialing from Standby Mode”. To return to go back, press the BACK soft key. 3) Press the DIAL soft key.

  • Page 32: Adjusting The Earpiece And Handset Speaker Volume, Clarity Booster

    UP308BH (DSS2465) ENG OM 1/14/05 11:46 AM ADJUSTING THE EARPIECE AND HANDSET SPEAKER VOLUME You can select different volume levels for the handset earpiece and the handset speaker (4 levels: Low to Max). The volume can only be adjusted during a call. Press •...

  • Page 33: Ringer Mute (temporarily), Mute Microphone, Traveling Out-of-range

    UP308BH (DSS2465) ENG OM 1/14/05 11:46 AM RINGER MUTE (temporarily) You can temporarily mute the handset and the base ringer tone. To mute the handset ringer tone, when the handset is off the cradle and the phone is ringing, press the MUTE soft key.

  • Page 34: Flash And Call Waiting, New Message Led

    UP308BH (DSS2465) ENG OM 1/14/05 11:46 AM FLASH AND CALL WAITING If the call waiting tone sounds during a call: AUSTRALIA: You must subscribe through your local telephone company to receive Call Waiting Service. NEW ZEALAND: Press To return to the original caller, press NEW MESSAGE LED The new message LED on the handset is designed to work with your answering system.

  • Page 35: Phonebook, Storing Phone Numbers, Names Distinctive Rings, And Speed Dial

    UP308BH (DSS2465) ENG OM 1/14/05 11:46 AM PHONEBOOK Phonebook allows you to dial a number using just a few key presses. Your phone stores names/numbers in the phonebook memory location, and you can search names in alphabetical order. You have a total of 100 locations that can be used for the phonebook (including the Speed dials) and Caller ID messages.

  • Page 36

    UP308BH (DSS2465) ENG OM 1/14/05 11:46 AM 3) Press the STORE soft key, “ 4) Enter the name (up to 16 characters) by using the number keypad (see the “Steps for Entering Names and Special Characters” on page 31). • When the memory is full, you will hear a If a name is not required, go to step 5.

  • Page 37: Steps For Entering Names And Special Characters

    UP308BH (DSS2465) ENG OM 1/14/05 11:46 AM Page 31 STEPS FOR ENTERING NAMES AND SPECIAL CHARACTERS Refer to the letters on the number keys to select the desired characters. With each press of a number key ( ), the displayed character appears in the following order: Upper case letters first, lower case letters next and finally the number corresponding to the key.

  • Page 38

    UP308BH (DSS2465) ENG OM 1/14/05 11:46 AM If you make a mistake while entering a name Press the DELETE soft key to erase the wrong character, then enter the correct character. To delete all characters, press and hold the DELETE soft key. If the next character uses the same number For example, to enter Movies:...

  • Page 39: Viewing The Phonebook

    UP308BH (DSS2465) ENG OM 1/14/05 11:46 AM VIEWING THE PHONEBOOK Your phone stores names/numbers in the phonebook memory locations, and you can search names in alphabetical order. You can view the phonebook even while the phone is in use. 1) Press the CID RDL PB soft key (or the MENU soft key during a call). 2) Press to move the pointer to “...

  • Page 40: Making Calls Using The Phonebook, Speed Dialing

    UP308BH (DSS2465) ENG OM 1/14/05 11:46 AM MAKING CALLS USING THE PHONEBOOK From Standby Mode 1) When the phone is in the standby mode, view the While the telephone is phonebook location to dial (see “Viewing the automatically dialing Phonebook” on page 33). a number form speed dial memory, the 2) Press...

  • Page 41: Editing Or Erasing A Stored Name, Phone Number Distinctive Ring, And Speed Dial

    UP308BH (DSS2465) ENG OM 1/14/05 11:46 AM EDITING OR ERASING A STORED NAME, PHONE NUMBER, DISTINCTIVE RING, AND SPEED DIAL 1) When the phone is in the standby mode, press the CID RDL PB soft key. 2) Press to move the pointer to “...

  • Page 42: Chain Dialing, Memory Dialing (base Only)

    UP308BH (DSS2465) ENG OM 1/14/05 11:47 AM CHAIN DIALING The memory locations in the handset are not limited to phone numbers. You can also store a group of numbers (up to 20 digits), that you need to enter once your call connects.

  • Page 43: Caller Id

    UP308BH (DSS2465) ENG OM 1/14/05 11:47 AM CALLER ID You must subscribe to Caller ID service to use this feature. When the telephone rings, the Caller ID feature allows you to view the caller’s name and phone number in the display before you answer the phone. Additionally, you can dial the displayed number and store the information for memory dialing.

  • Page 44: Viewing The Caller Id List

    UP308BH (DSS2465) ENG OM 1/14/05 11:47 AM You may receive any one of the following messages: When invalid data is received When a private name or number is received When a unknown name or number is received When the mobile phone number and date are received When a call is coming from a payphone (Australia only) When a overseas call is received (New Zealand only) 2) When you pick up the phone, the display changes to “...

  • Page 45: Deleting Information From The Caller Id List

    UP308BH (DSS2465) ENG OM 1/14/05 11:47 AM DELETING INFORMATION FROM THE CALLER ID LIST Deleting a Caller ID message 1) When the phone is in the standby mode, view the Caller ID information to be deleted (see “Viewing the Caller ID List”...

  • Page 46: Using The Caller Id Message List

    UP308BH (DSS2465) ENG OM 1/14/05 11:47 AM USING THE CALLER ID MESSAGE LIST Calling a party from the Caller ID list From Standby mode • You cannot make a call 1) When the phone is in the standby mode, view the Caller from the Caller ID list ID message (see “Viewing the Caller ID List”...

  • Page 47: The Integrated Answering Device

    UP308BH (DSS2465) ENG OM 1/14/05 11:47 AM THE INTEGRATED ANSWERING DEVICE The phone has a built-in answering system that answers and records incoming calls. You can also use your answering system to record a conversation, leave a voice memo message, or to announce a special outgoing message to callers when you’re away from your phone.

  • Page 48: Turning The Answering System On/off, Setting Up Your Answering System

    UP308BH (DSS2465) ENG OM 1/14/05 11:47 AM TURNING THE ANSWERING SYSTEM ON/OFF 1) To turn the answering system On, press After the announcement “Answering System is on”, the current greeting message will be played and you will hear a confirmation tone. The message counter displays the •...

  • Page 49

    UP308BH (DSS2465) ENG OM 1/14/05 11:47 AM Choosing between the two outgoing messages When the phone is in the standby mode, press the outgoing message is played. Each time is switched between the pre-recorded and the personal outgoing message. Deleting an outgoing message To delete the personal outgoing message, press The system announces “Greeting has been deleted”.

  • Page 50

    UP308BH (DSS2465) ENG OM 1/14/05 11:47 AM Adjusting the speaker volume level When the base speaker is in use, press volume. Press The numbers 1-10 appear on the base indicating the volume levels. 1 being the softest and 10 being the loudest. Press and hold on the base to scroll Using the menu mode...

  • Page 51

    UP308BH (DSS2465) ENG OM 1/14/05 11:47 AM Setting the Time Follow these steps to set the clock on the answering system to the correct time. 1) Press 2) Press /SELECT or /SELECT until the correct day is announced and the corresponding number (from “...

  • Page 52

    UP308BH (DSS2465) ENG OM 1/14/05 11:47 AM Setting the ring time The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message. You can set the ring time to answer after four, six, or nine rings.

  • Page 53

    UP308BH (DSS2465) ENG OM 1/14/05 11:47 AM Announce only feature The Announce only feature plays a pre-recorded outgoing message “Hello, no one is available to take your call. Please call again.”, and it will not allow the caller to leave a message. To set “Announce only”, follow the steps on page 46.

  • Page 54

    UP308BH (DSS2465) ENG OM 1/14/05 11:48 AM Setting the call screen You can screen calls when the Call Screen function is set to On. 1) Press The current Call Screen setting (On or Off) appears on the base. 2) Press 3) Press You can mute the Call Screen temporarily.

  • Page 55: Using Your Answering System

    UP308BH (DSS2465) ENG OM 1/14/05 11:48 AM USING YOUR ANSWERING SYSTEM The message counter displays the number of messages stored in memory. If the display flashes, then there are new messages waiting for you. The answering system is designed to play your new messages first.

  • Page 56

    UP308BH (DSS2465) ENG OM 1/14/05 11:48 AM Skipping a message 1) Press 2) Press Each time have several messages, press want to play. To quickly scroll through a message, press and hold The system advances through the playback at double speed. 3) Press The message counter shows the number of messages stored in memory.

  • Page 57

    UP308BH (DSS2465) ENG OM 1/14/05 11:48 AM Voice memo The voice memo function allows the user to record messages (more than 2 seconds and within 4 minutes). 1) Press and hold . You hear a beep. 2) Start your recording after the announcement “Record Memo Message” and a confirmation tone.

  • Page 58: Remote Operation

    UP308BH (DSS2465) ENG OM 1/14/05 11:48 AM REMOTE OPERATION You can operate your answering system from a remote location using any touch-tone telephone or the handset. For your convenience Remote access away from home a remote operation You can check, play, or delete messages, even record a new greeting message when card is provided for you to use while you are away from home.

  • Page 59

    UP308BH (DSS2465) ENG OM 1/14/05 11:48 AM Command Function then Repeat a Message* then Playing incoming Messages then Skipping a Message then Deleting a Message then Stop Operation * For Repeat a Message function, press # then repeat the previous message, or press # then repeat the current message.

  • Page 60

    UP308BH (DSS2465) ENG OM 1/14/05 11:48 AM Playing incoming messages 1) When the phone is in the standby mode, press the “ announces the current time and the number of messages stored in the memory. Messages will be played in the order in which they were received. The time and •...

  • Page 61: Expanding Your Phone, Connecting The Charger

    UP308BH (DSS2465) ENG OM 1/14/05 11:48 AM EXPANDING YOUR PHONE Your phone supports up to 4 handsets (including the handset(s) supplied with your phone). You can now place a fully featured cordless handset anywhere AC power is available to connect the handset charger. Effective combinations, for example: - 4-way conferencing (the base, 2 handsets, and one outside line), while on an intercom call using the other 2 handsets, or...

  • Page 62: Register The Handset

    UP308BH (DSS2465) ENG OM 1/14/05 11:48 AM REGISTER THE HANDSET If you purchase an extra handset, you need to register the handset to the main base before use. Only one handset can be registered at a time. DSS2415 Main Base The handset ID for the supplied handset(s) was assigned at the factory, which has #1 (#1 and #2 for DSS2465) in the display.

  • Page 63: Using Two Way Communication Between The Handsets Anywhere Without The Base (directlink)

    UP308BH (DSS2465) ENG OM 1/14/05 11:48 AM USING TWO WAY COMMUNICATION BETWEEN THE HANDSETS ANYWHERE WITHOUT THE BASE (DIRECTLINK) To use this feature, you must enter the two handsets into the DirectLink mode first. To enter the DirectLink mode • During DirectLink mode, batteries use time when fully charged is as follows: - Up to 7 hours continuous use.

  • Page 64: Way Conferencing, Way Conferencing

    UP308BH (DSS2465) ENG OM 1/14/05 11:48 AM 3-WAY CONFERENCING The phone permits 3-way conversations between the handset, base, and an outside line. When speaking on the handset 1) Press 2) To hang up, press be connected to the call. When speaking on the base 1) Press 3-way conversation.

  • Page 65: Intercom/call Transfer Feature

    UP308BH (DSS2465) ENG OM 1/14/05 11:49 AM INTERCOM/CALL TRANSFER FEATURE Intercom and Call Transfer features are available for your phone. • If the party is busy or out of range, you will hear a beep and the handset returns to the standby mode.

  • Page 66

    UP308BH (DSS2465) ENG OM 1/14/05 11:49 AM Call Transfer Feature From handset to handset or to the base 1) During a call, press 2) Select a handset or the base to transfer the call to within 10 seconds (refer to step 2 under “From handset to handset or to the base”...

  • Page 67: Changing The Digital Security Code

    UP308BH (DSS2465) ENG OM 1/14/05 11:49 AM CHANGING THE DIGITAL SECURITY CODE The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.

  • Page 68: Note On Power Sources

    Please use only “AA” rechargeable Ni-MH batteries. Warning To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden adapter model specifically designated for this product, and “AA” rechargeable Ni-MH batteries. • Use only “AA” rechargeable Ni-MH batteries.

  • Page 69: Troubleshooting

    UP308BH (DSS2465) ENG OM 1/14/05 11:49 AM TROUBLESHOOTING If your phone is not performing to your expectations, please try these simple steps first. Symptom The charge LED won’t illuminate • Make sure the AC adapter is plugged into the base (or the charger when the handset is placed in (for DSS2465 only)) and wall outlet.

  • Page 70

    UP308BH (DSS2465) ENG OM 1/14/05 11:49 AM Symptom The handset or the base doesn’t • Charge the batteries in the handset for 17-20 hours by placing the handset ring or can’t receive an on the base or charging cradle. intercom call. •...

  • Page 71

    • Make sure you have set the time (see “Setting Day and Time” on page 21 or “Setting the Time” on page 45). If you still have a problem. • Check our web site for the latest information and frequently asked questions. www.uniden.com.au www.uniden.co.nz Page 65 Suggestion...

  • Page 72: Index

    UP308BH (DSS2465) ENG OM 1/14/05 11:49 AM INDEX 0 - 9 3-way conferencing ...58 4-way conferencing ...58 16 ring options ...17 Announce only feature ...47 Answering system Deleting a message ...50 Playing your messages ...49 Recording a conversation ...51 Remote access ...52 Repeating a message ...49 Skipping a message ...50 Turning On/Off ...42...

  • Page 73: Remote Operation Card

    UP308BH (DSS2465) ENG OM 1/14/05 11:49 AM REMOTE OPERATION CARD Page 67 C U T REMOTE OPERATION CARD Remote access away from Turn on the answering home system remotely 1. Call your phone number from a 1. Call your phone and let it ring touch-tone phone.

  • Page 74

    UP308BH (DSS2465) ENG OM 1/14/05 11:49 AM Page 68 C U T Task Repeat a Message Playing incoming Messages Skipping a Message Deleting a Message Stop Operation Answering System On Memo Record/Stop Greeting Message Record/Stop Answer System Off Help Guidance [ 68 ]...

  • Page 75: Warranty

    (C) Improperly installed, (D) Repaired by someone other than an authorized Uniden Repair Agent for a defect or malfunction covered by this warranty, (E) Used in conjunction with any equipment or parts or as part of a system not manufactured by Uniden.

  • Page 76

    Place this handset and charger in any convenient location, no need for an extra phone jack! Another innovation from Uniden, the company that bring outstanding wireless communication products to people's lives throughout the world.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: